Emergency Lighting Inspection Checklist

Record the findings for one emergency lighting system (or one floor of a larger system). Mark each item Pass, Fail, or N/A. The tool gives an overall checklist result and a full breakdown that you can copy into your inspection report or save as a PDF. One failed item means the system does not pass this checklist. Nothing you enter is stored or sent anywhere.

System identification

System ID / location Inspection date Inspector

Required duration Required minimum illuminance (lux) Typically 1 lux along the route. Use the project's value. Measured duration (min), optional Measured minimum lux, optional

Entering a measured value sets the duration and illumination items automatically. You can still change them.

Inspection check items

Notes / deficiency description

Emergency Lighting Inspection Result

Check item	Status

This result reflects a field checklist, not a compliance certificate. Confirm each item against the applicable standard (EN 1838, EN 50172, NFPA 101, or local code), the approved documents, and the manufacturer's specification before issuing a finding. Photograph all failed items.